Economical Pipe Lining Supplies & Lateral Lining Materials, Trenchless Materials Manufacturers, Sectional Lining CIPP Supplies

Imported European trenchless pipe lining supplies at affordable prices

Trenchless Pipe Lining is the world’s largest supplier of pipe lining materials for cured in place technology such as liners and resins. We have a convenient online pipe liner store that provides a wide array of imported European pipe relining materials. Unlike other manufacturers, our pipe lining supplies are not made in labor camps in China and are not copycat pipe relining supplies.

Our pipe lining supplies are specifically designed to solve the problems you are experiencing now:

• an elasticated woven pipe liner that may be used for lining drain pipes with 4 – 6 inch transitions- it gives an exact fit in the 4 inch drain and expands out to fit the 6 inch section of pipe, without having to custom order expensive pipe lining sections
• no stretch flexible liners that can navigate multiple 90′s and 45′s, but without stretching into a sewer main for example
• resins and additives that can accelerate cure times to less than 1 hour without the use of hot water or steam
• 5mm-6mm sewer pipe liners for extra strength other pipe lining manufacturers can’t offer
• a semi elastic liner significantly undersized to give a good finish in cast iron pipes that have a layer of scale or encrustation reducing the effective pipe diameter
• rain drain down pipe gutter liner, a thin walled elastic liner designed for vertical down pipes and gutters
• pipe liners designed to stretch radially by up to 50% so that 90′s have no wrinkles

Our pipe lining resins take out the risk of too fast or too slow cure times:

• we have a “long working time” “fast underground cure” resin: Call it “big pipe resin” or “summer resin”. This CIPP resin product  gives an unbelievable working time of up to 4 hours yets cures quickly below ground with or without assistance of heat. Ideal for long  shots or work in summer
• get this, we also have a “slow-fast” resin, that gives you 30 minutes working time above ground, but cures in 15 miutes underground. Imagine how this will ramp up your productivity..
• low heat triggered resin – near instant cure resin but yet unbelievably gives give working time of up to 4 hrs !!!” How ?. The resin is very stable at temperatures under 20 deg C (68 deg F). Once temperature rise above 35 deg C (90 deg F)…Bang you get a near instant reaction. No need for recirculating water and all that aggravation.
• super fast cure resin – a solvent free resin supplied for use on CIPP Relining of drain and sewer pipes. The resins gives and ample working time of up to 45 minutes, depending on temparature, yet cures rapidly within 2 -3 hours later at ambient. For faster curing times, non-recirculated warm water at 110 deg will speed up cure to within 1 -2 hours after mixing

Calibration tubes and bladders

Pipe lining bladder and calibration tube suppliers

We have solved problems you assumed were just part of pipe lining installation. Check these bladders out

• Inbuilt lubricants to allow for easy inversion in a super strong bladder that prevents bursting!
• bladders that can stretch..a translucent bladder (so you can see resin) supplied with reinforcement for additional strength. Expands by up to 50%. Ideal for the CIPP double inversion pipe relining method where you shoot the liner and calibration tube at the same time. Inverts at 1psi (and at 5psi with liner at the same time)